Hi all,
Finally getting my finger out after storing this project for a few years and found that i need to get my cams and maybe followers reground due to pitting.
Wondering if any Aussies have experience with this and could offer advice or somewhere to get this done?
Im in Central coast/Newcastle area…
TIA,
Chris
Try Waggotts in Northern NSW. They did my CB1100 years ago.
They sure do! cheers!
Cool. What grind did they recommend?
Pretty sure they can do a grind to suit whatever you would like…some like a hp kick at higher rpm but you’ll possibly need to do some fueling and maybe exhaust mods to suit, this will usually sacrifice something somwhere else in the rpm range and rideability may suffer. Some like a mid-range torque increase…again, you may sacrifice something somewhere else in the higher rpm range.
Personally I’d probably go for the mid-range increase, if we’re honest, I’d suggest this is where most of us ride our bikes, (in the 3000-7000rpm range), rarely do we ride at 8500rpm+ unless we do a lot of track days or racing.
Smithy.
They will have maybe 2-3 masters on file so you take your pick. Sure they “could” give you what you want outside of what they already have on file but prepare to pay for it big time.
Just went for standard, got some motivation back now 