# Head lift stand for VF1000R?

**URL:** <https://forum.vf1000.com/t/head-lift-stand-for-vf1000r/5677>\
**Category:** In the Shed\
**Created:** [July 28, 2026, 9:29pm UTC](https://forum.vf1000.com/t/head-lift-stand-for-vf1000r/5677 "2026-07-28T21:29:18Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Lowflyer](https://forum.vf1000.com/letter_avatar_proxy/v4/letter/l/b4bc9f/32.png) [@Lowflyer](https://forum.vf1000.com/u/Lowflyer)\
**Post date:** [July 28, 2026, 9:29pm UTC](https://forum.vf1000.com/t/head-lift-stand-for-vf1000r/5677/1 "2026-07-28T21:29:18Z")

</div>

I’m looking for a head lift stand for my VF1000R. I see lots of them for around $100usd. The [Bike Master](https://www.revzilla.com/motorcycle/bikemaster-front-head-lift-stand?sku_id=10210215) looks pretty good to me. I have paddock stands.

Do some of you folks have a favorite, or probably more important, do you know of some to avoid?

I just found this [Moto4U stand](https://www.amazon.com/MOTO4U-Motorcycle-Headlift-Kawasaki-Yamaha/dp/B07W7J4VQD/ref=sr_1_7), it looks like it allows the axle to be removed easier than the Bike Master. What are your thoughts?

Thanks,

Gil

---

<div class="post-metadata">

**Author:** ![Faxe](https://forum.vf1000.com/user_avatar/forum.vf1000.com/faxe/32/53_2.png) [@Faxe](https://forum.vf1000.com/u/Faxe)\
**Post date:** [July 29, 2026, 12:10pm UTC](https://forum.vf1000.com/t/head-lift-stand-for-vf1000r/5677/2 "2026-07-29T12:10:57Z")

</div>

I use different methode in combination with a rear stand My father in law was carpenter and made something for me. I use a car lifter below the oil pan and secure the front.

The other option are mounting points at the garage ceiling. But you have to be careful. Yesterday I removed rear wheel and placed the lifter a little bit far to the rear and at some point it lifted the rear.

 ![8c3e1973d86cc1df9a8f835136937090](https://forum.vf1000.com/uploads/default/original/2X/3/36c035dd74eda0e95e84b3ae74e832021d5ea489.jpeg)

---

<div class="post-metadata">

**Author:** ![Smithy1](https://forum.vf1000.com/user_avatar/forum.vf1000.com/smithy1/32/2872_2.png) [@Smithy1](https://forum.vf1000.com/u/Smithy1)\
**Post date:** [July 29, 2026, 7:02pm UTC](https://forum.vf1000.com/t/head-lift-stand-for-vf1000r/5677/3 "2026-07-29T19:02:29Z")

</div>

I just bought a cheap pair of paddock stands, front & rear, off fleabay…I have four bikes and they fit all four of them…All I have to do is adjust the height and change out the steering head pin on the front one to suit each bike…

It allows the front wheel to be removed easily too.

 ![20250426_125607](https://forum.vf1000.com/uploads/default/original/2X/4/4c6f14a415963f643bb3bf9bd19055b6c6775bd3.jpeg)

Smithy.

---

<div class="post-metadata">

**Author:** ![Samdance](https://forum.vf1000.com/letter_avatar_proxy/v4/letter/s/85e7bf/32.png) [@Samdance](https://forum.vf1000.com/u/Samdance)\
**Post date:** [August 4, 2026, 4:52pm UTC](https://forum.vf1000.com/t/head-lift-stand-for-vf1000r/5677/4 "2026-08-04T16:52:57Z")

</div>

I have the Pit Bull headstand lift. It is really nice, but pricey. Order it with pin number 19, works perfectly.
