# lots of questions vf1000f2f

**URL:** <https://forum.vf1000.com/t/lots-of-questions-vf1000f2f/2464>\
**Category:** In the Shed\
**Created:** [October 31, 2016, 10:09pm UTC](https://forum.vf1000.com/t/lots-of-questions-vf1000f2f/2464 "2016-10-31T22:09:52Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![radicalrabit](https://forum.vf1000.com/letter_avatar_proxy/v4/letter/r/6a8cbe/32.png) [@radicalrabit](https://forum.vf1000.com/u/radicalrabit)\
**Post date:** [October 31, 2016, 10:09pm UTC](https://forum.vf1000.com/t/lots-of-questions-vf1000f2f/2464/1 "2016-10-31T22:09:52Z")

</div>

Lots of questions.  
The bike had the carbs cleaned and refitted 2 diaphrams were replaced.  
The book says the back cycl carbs have different needles but doesnt say what size.

The bike has a 4 into 1 collector but needs a different end can i was given a can from a 1000cc bike but it is a much bigger diameter connection . So how do I marry that up to a vf collector?  
I am sure someone on here must know…  
Also there is a leak at the head where the left rear exhaust connects to the head…I cant tighten the stud any further…What damage or symptoms will this cause?

---

<div class="post-metadata">

**Author:** ![vf\_pete](https://forum.vf1000.com/user_avatar/forum.vf1000.com/vf_pete/32/6_2.png) [@vf\_pete](https://forum.vf1000.com/u/vf_pete)\
**Post date:** [November 1, 2016, 12:14am UTC](https://forum.vf1000.com/t/lots-of-questions-vf1000f2f/2464/2 "2016-11-01T00:14:54Z")

</div>

hi radical,  
as far as I know the needles are the same size front and back…  
all you need for your exhaust is a gasket, just measure the internal size of your end can and the external size of the collector, then search it out on ebay
