# rack for vf1000fe

**URL:** <https://forum.vf1000.com/t/rack-for-vf1000fe/1816>\
**Category:** Sales and Wants\
**Created:** [January 19, 2013, 9:59pm UTC](https://forum.vf1000.com/t/rack-for-vf1000fe/1816 "2013-01-19T21:59:50Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![windysolar1](https://forum.vf1000.com/user_avatar/forum.vf1000.com/windysolar1/32/297_2.png) [@windysolar1](https://forum.vf1000.com/u/windysolar1)\
**Post date:** [January 19, 2013, 9:59pm UTC](https://forum.vf1000.com/t/rack-for-vf1000fe/1816/1 "2013-01-19T21:59:50Z")

</div>

Did anyone ever make a small rear rack for these bikes  
I need somewhere to keep my on the road first aid kit for me and the bike ?[8D]

---

<div class="post-metadata">

**Author:** ![philjo](https://forum.vf1000.com/letter_avatar_proxy/v4/letter/p/f475e1/32.png) [@philjo](https://forum.vf1000.com/u/philjo)\
**Post date:** [January 20, 2013, 10:33am UTC](https://forum.vf1000.com/t/rack-for-vf1000fe/1816/2 "2013-01-20T10:33:15Z")

</div>

I ordered one yesterday online from Hepco and Becker for the weekend away, its £148.00, I was tempted to make one but I maybe would have had to buy a tube bender then the steel, I’m not sure but I might have bought the last one from Hepco but it is always worth an enquiry if you want one.

---

<div class="post-metadata">

**Author:** ![philjo](https://forum.vf1000.com/letter_avatar_proxy/v4/letter/p/f475e1/32.png) [@philjo](https://forum.vf1000.com/u/philjo)\
**Post date:** [January 20, 2013, 10:38am UTC](https://forum.vf1000.com/t/rack-for-vf1000fe/1816/3 "2013-01-20T10:38:12Z")

</div>

I forgot to mention that they have some other model VF’s in their listing, I don’t know if they are in stock but again its worth enquiring.

---

<div class="post-metadata">

**Author:** ![Rogerinleeds](https://forum.vf1000.com/letter_avatar_proxy/v4/letter/r/3d9bf3/32.png) [@Rogerinleeds](https://forum.vf1000.com/u/Rogerinleeds)\
**Post date:** [January 20, 2013, 2:33pm UTC](https://forum.vf1000.com/t/rack-for-vf1000fe/1816/4 "2013-01-20T14:33:34Z")

</div>

I have just made one, looks better ( would say that though) than H&P one shown. Not yet on bike, will post a pic when it is fitted. £8 for 1/2 inch 18swg steel tube, £12 brazing rods and flux, borrowed gas bottles, my own pipe bender and £32 for powder coating. It doe fit to bike through tail fairing though, previous owners mod… Will post when weather gets a bit warmer

---

<div class="post-metadata">

**Author:** ![hippo](https://forum.vf1000.com/letter_avatar_proxy/v4/letter/h/b487fb/32.png) [@hippo](https://forum.vf1000.com/u/hippo)\
**Post date:** [February 5, 2013, 4:10am UTC](https://forum.vf1000.com/t/rack-for-vf1000fe/1816/5 "2013-02-05T04:10:45Z")

</div>

Ventura list a fitting system for each of the VFs that takes a range of their bags. Not that cheap, but good gear. Cheers  
[http://www.ventura-bike.co.uk/fitments/Honda/316-vf\_1000\_fe\_fd.aspx](http://www.ventura-bike.co.uk/fitments/Honda/316-vf_1000_fe_fd.aspx)

---

<div class="post-metadata">

**Author:** ![philjo](https://forum.vf1000.com/letter_avatar_proxy/v4/letter/p/f475e1/32.png) [@philjo](https://forum.vf1000.com/u/philjo)\
**Post date:** [February 5, 2013, 10:11pm UTC](https://forum.vf1000.com/t/rack-for-vf1000fe/1816/6 "2013-02-05T22:11:07Z")

</div>

I received my hepco-becker rack a few days ago, looks well made and nicely powdercoated, unfortunately there was’nt any instructions, I fitted the side rails, then offered up the rack, there was a whopping 30mm gap between the mounting brackets, it looked like the upright brackets had been welded on the wrong way round because they angled off into the wrong direction[:(!]  
At this point I should have contacted H-B or sent it back, but I managed to neatly bend them back over to meet the rack mounts[B)]  
In future I will make my own[xx(]

---

<div class="post-metadata">

**Author:** ![vf\_pete](https://forum.vf1000.com/user_avatar/forum.vf1000.com/vf_pete/32/6_2.png) [@vf\_pete](https://forum.vf1000.com/u/vf_pete)\
**Post date:** [February 6, 2013, 12:31am UTC](https://forum.vf1000.com/t/rack-for-vf1000fe/1816/7 "2013-02-06T00:31:45Z")

</div>

thats bad phil, it just sort of takes the shine off things when you pay a decent lump of money for what should be a quality product, then when it arrives its been made wrong…

never mind it will soon be summer [:)][:D][8D]
