# Voltage reg update

**URL:** <https://forum.vf1000.com/t/voltage-reg-update/4499>\
**Category:** In the Shed\
**Created:** [May 6, 2022, 5:35am UTC](https://forum.vf1000.com/t/voltage-reg-update/4499 "2022-05-06T05:35:45Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![gmcc](https://forum.vf1000.com/user_avatar/forum.vf1000.com/gmcc/32/1751_2.png) [@gmcc](https://forum.vf1000.com/u/gmcc)\
**Post date:** [May 6, 2022, 5:35am UTC](https://forum.vf1000.com/t/voltage-reg-update/4499/1 "2022-05-06T05:35:45Z")

</div>

New reg arrived so garage this weekend will check all wire going to altinator as they must be a reason this has happened. As it was the 3 yellows altinator wire that were burnt I need to have a look and see no wires are bared. Any other suggestions welcome.

---

<div class="post-metadata">

**Author:** ![gmcc](https://forum.vf1000.com/user_avatar/forum.vf1000.com/gmcc/32/1751_2.png) [@gmcc](https://forum.vf1000.com/u/gmcc)\
**Post date:** [May 12, 2022, 6:31pm UTC](https://forum.vf1000.com/t/voltage-reg-update/4499/2 "2022-05-12T18:31:31Z")

</div>

New voltage regulator fitted new plug solderd on and all connection’s cleaned and earth at top of frame. If u think I’ve forgot something let me know. Hopefully now ready for scottish trip

---

<div class="post-metadata">

**Author:** ![vf\_pete](https://forum.vf1000.com/user_avatar/forum.vf1000.com/vf_pete/32/6_2.png) [@vf\_pete](https://forum.vf1000.com/u/vf_pete)\
**Post date:** [May 13, 2022, 5:26am UTC](https://forum.vf1000.com/t/voltage-reg-update/4499/3 "2022-05-13T05:26:28Z")

</div>

Sounds like you got it all covered, just try multi meter on see what figures you get

---

<div class="post-metadata">

**Author:** ![garyb](https://forum.vf1000.com/user_avatar/forum.vf1000.com/garyb/32/5_2.png) [@garyb](https://forum.vf1000.com/u/garyb)\
**Post date:** [May 13, 2022, 8:33pm UTC](https://forum.vf1000.com/t/voltage-reg-update/4499/4 "2022-05-13T20:33:55Z")

</div>

Sounds like you’ve got it covered Graham, I would have suggested soldering as the best way to keep the heat to a minimum and you’ve done that so hopefully all will be good.

---

<div class="post-metadata">

**Author:** ![gmcc](https://forum.vf1000.com/user_avatar/forum.vf1000.com/gmcc/32/1751_2.png) [@gmcc](https://forum.vf1000.com/u/gmcc)\
**Post date:** [May 14, 2022, 4:32pm UTC](https://forum.vf1000.com/t/voltage-reg-update/4499/5 "2022-05-14T16:32:03Z")

</div>

Had bike out a wee run. Well a tank full which was eh £32.50. Fkn rip off.  
Volt stayed between 14.4 and 14.5. I’m happy weh that. But as I’ve said before what do I know. Handling well weh my great bulk on it.  
I think it’s ready. Fingers crossed

---

<div class="post-metadata">

**Author:** ![vf\_pete](https://forum.vf1000.com/user_avatar/forum.vf1000.com/vf_pete/32/6_2.png) [@vf\_pete](https://forum.vf1000.com/u/vf_pete)\
**Post date:** [May 15, 2022, 7:32am UTC](https://forum.vf1000.com/t/voltage-reg-update/4499/6 "2022-05-15T07:32:13Z")

</div>

Top man Graham, good numbers on the reg/rec 👍
