# Wanting 1000F Petcock

**URL:** <https://forum.vf1000.com/t/wanting-1000f-petcock/3501>\
**Category:** Sales and Wants\
**Created:** [June 12, 2020, 3:53pm UTC](https://forum.vf1000.com/t/wanting-1000f-petcock/3501 "2020-06-12T15:53:27Z")\
**Posts on this page:** 17\
**Page:** 1

<div class="post-metadata">

**Author:** ![Viffer](https://forum.vf1000.com/user_avatar/forum.vf1000.com/viffer/32/2469_2.png) [@Viffer](https://forum.vf1000.com/u/Viffer)\
**Post date:** [June 12, 2020, 3:53pm UTC](https://forum.vf1000.com/t/wanting-1000f-petcock/3501/1 "2020-06-12T15:53:27Z")

</div>

Hello Brothers, Anyone in the UK got a useable petcock for my 1000F? Mine leaks when on reserve.

---

<div class="post-metadata">

**Author:** ![thx113](https://forum.vf1000.com/letter_avatar_proxy/v4/letter/t/71c47a/32.png) [@thx113](https://forum.vf1000.com/u/thx113)\
**Post date:** [June 12, 2020, 5:48pm UTC](https://forum.vf1000.com/t/wanting-1000f-petcock/3501/2 "2020-06-12T17:48:13Z")

</div>

For the sake of 40 quid just buy a new one from David Silver spares.

---

<div class="post-metadata">

**Author:** ![Viffer](https://forum.vf1000.com/user_avatar/forum.vf1000.com/viffer/32/2469_2.png) [@Viffer](https://forum.vf1000.com/u/Viffer)\
**Post date:** [June 12, 2020, 7:12pm UTC](https://forum.vf1000.com/t/wanting-1000f-petcock/3501/3 "2020-06-12T19:12:30Z")

</div>

Yes i know but its 50 quid including VAT plus postage 😬 I am from Yorkshire as well 😁

---

<div class="post-metadata">

**Author:** ![pablo\_el](https://forum.vf1000.com/user_avatar/forum.vf1000.com/pablo_el/32/742_2.png) [@pablo\_el](https://forum.vf1000.com/u/pablo_el)\
**Post date:** [June 12, 2020, 9:32pm UTC](https://forum.vf1000.com/t/wanting-1000f-petcock/3501/4 "2020-06-12T21:32:42Z")

</div>

Have anyone tried Allballs petcock repair kit? Seems to have all the parts…

---

<div class="post-metadata">

**Author:** ![Viffer](https://forum.vf1000.com/user_avatar/forum.vf1000.com/viffer/32/2469_2.png) [@Viffer](https://forum.vf1000.com/u/Viffer)\
**Post date:** [June 12, 2020, 9:57pm UTC](https://forum.vf1000.com/t/wanting-1000f-petcock/3501/5 "2020-06-12T21:57:57Z")

</div>

I’ve seen the repair kit, but in my case there is a small bit of alloy damage to the face of the reserve circuit which means that the triple O ring won’t seal in the reserve position. It’s not really a problem as long as I fill up before that! 😁

---

<div class="post-metadata">

**Author:** ![pablo\_el](https://forum.vf1000.com/user_avatar/forum.vf1000.com/pablo_el/32/742_2.png) [@pablo\_el](https://forum.vf1000.com/u/pablo_el)\
**Post date:** [June 12, 2020, 10:52pm UTC](https://forum.vf1000.com/t/wanting-1000f-petcock/3501/6 "2020-06-12T22:52:48Z")

</div>

Tig weld and file it down.

---

<div class="post-metadata">

**Author:** ![Viffer](https://forum.vf1000.com/user_avatar/forum.vf1000.com/viffer/32/2469_2.png) [@Viffer](https://forum.vf1000.com/u/Viffer)\
**Post date:** [June 13, 2020, 11:33am UTC](https://forum.vf1000.com/t/wanting-1000f-petcock/3501/7 "2020-06-13T11:33:57Z")

</div>

Pablo can you tig weld this for me!😉😁 ![20200613_123326](https://forum.vf1000.com/uploads/default/original/2X/f/fad7ae6d6060f2f6a0c1a97fb4b6b2e7b3861b42.jpeg)

---

<div class="post-metadata">

**Author:** ![garyb](https://forum.vf1000.com/user_avatar/forum.vf1000.com/garyb/32/5_2.png) [@garyb](https://forum.vf1000.com/u/garyb)\
**Post date:** [June 13, 2020, 12:02pm UTC](https://forum.vf1000.com/t/wanting-1000f-petcock/3501/8 "2020-06-13T12:02:31Z")

</div>

Andy I may have a spare one though no idea if it leaks, it would need a new triple o ring gasket though i may have a new one of those as i bought one last year and then bought a new tap and it came with a new gasket. I will have a look and see what i can dig up.

Garyb

---

<div class="post-metadata">

**Author:** ![Viffer](https://forum.vf1000.com/user_avatar/forum.vf1000.com/viffer/32/2469_2.png) [@Viffer](https://forum.vf1000.com/u/Viffer)\
**Post date:** [June 13, 2020, 12:13pm UTC](https://forum.vf1000.com/t/wanting-1000f-petcock/3501/9 "2020-06-13T12:13:29Z")

</div>

Cheers gaz, I’m just going to try an experiment with modified 7mm modern O rings and shaving down the face a bit. I’ll let you know.

---

<div class="post-metadata">

**Author:** ![garyb](https://forum.vf1000.com/user_avatar/forum.vf1000.com/garyb/32/5_2.png) [@garyb](https://forum.vf1000.com/u/garyb)\
**Post date:** [June 13, 2020, 12:30pm UTC](https://forum.vf1000.com/t/wanting-1000f-petcock/3501/10 "2020-06-13T12:30:28Z")

</div>

Ok, I’ve found new gasket and I can see the fe tank at the back of the shed but may need to launch an expedition to fight my way across the years of accumulated vf parts to reach it, there appears to be a bramble thicker than my arm growing right across the shed! I’ve been meaning to clean this shed out for about 10 years now as its known in the family as the haunted shed.  
 ![15920513397152364236431737680728](https://forum.vf1000.com/uploads/default/original/2X/e/ef29b1323ba2cf2f02891e54dd87b6c4a503f62d.jpeg)

Garyb

---

<div class="post-metadata">

**Author:** ![Viffer](https://forum.vf1000.com/user_avatar/forum.vf1000.com/viffer/32/2469_2.png) [@Viffer](https://forum.vf1000.com/u/Viffer)\
**Post date:** [June 13, 2020, 1:59pm UTC](https://forum.vf1000.com/t/wanting-1000f-petcock/3501/11 "2020-06-13T13:59:19Z")

</div>

Don’t go in there gaz! I’ve sanded enough off the face to get a good seal, So pop a cider and enjoy the sun!! 😃

---

<div class="post-metadata">

**Author:** ![garyb](https://forum.vf1000.com/user_avatar/forum.vf1000.com/garyb/32/5_2.png) [@garyb](https://forum.vf1000.com/u/garyb)\
**Post date:** [June 13, 2020, 2:57pm UTC](https://forum.vf1000.com/t/wanting-1000f-petcock/3501/12 "2020-06-13T14:57:49Z")

</div>

If you insist, I suppose i better get out and enjoy the sun, cider in hand!

---

<div class="post-metadata">

**Author:** ![pablo\_el](https://forum.vf1000.com/user_avatar/forum.vf1000.com/pablo_el/32/742_2.png) [@pablo\_el](https://forum.vf1000.com/u/pablo_el)\
**Post date:** [June 13, 2020, 8:03pm UTC](https://forum.vf1000.com/t/wanting-1000f-petcock/3501/13 "2020-06-13T20:03:09Z")

</div>

That is not that bad, I thought the damage would be worse. Any good welder could just put a drop there. Than yo can use dremel to get it in shape you need.

But you should be able to seal it with some silicone or as you said some trimmed down orings. Question is if it will leak internally. I have 3 orings trimmed and installed and reserve and on positions seem to be the same now.

---

<div class="post-metadata">

**Author:** ![Faxe](https://forum.vf1000.com/user_avatar/forum.vf1000.com/faxe/32/53_2.png) [@Faxe](https://forum.vf1000.com/u/Faxe)\
**Post date:** [June 15, 2020, 1:50pm UTC](https://forum.vf1000.com/t/wanting-1000f-petcock/3501/14 "2020-06-15T13:50:47Z")

</div>

Yes, I bougt All Balls repair set (inner parts) for my VFR 400 and it works well. For the UK [http://www.nrp-carbs.co.uk/](http://www.nrp-carbs.co.uk/) might another source (cheaper P&P).

These sets help if the inner 4 hole rubber part is damaged.

Axel

---

<div class="post-metadata">

**Author:** ![Viffer](https://forum.vf1000.com/user_avatar/forum.vf1000.com/viffer/32/2469_2.png) [@Viffer](https://forum.vf1000.com/u/Viffer)\
**Post date:** [June 20, 2020, 11:49am UTC](https://forum.vf1000.com/t/wanting-1000f-petcock/3501/16 "2020-06-20T11:49:11Z")

</div>

AlDav,  
Merci pour l’information. J’ai réussi à réparer moi-même le robinet

Cordialement  
Drew

---

<div class="post-metadata">

**Author:** ![bif](https://forum.vf1000.com/user_avatar/forum.vf1000.com/bif/32/534_2.png) [@bif](https://forum.vf1000.com/u/bif)\
**Post date:** [June 20, 2020, 1:52pm UTC](https://forum.vf1000.com/t/wanting-1000f-petcock/3501/17 "2020-06-20T13:52:29Z")

</div>

A man of many talents Drew,your with me on my next French trip

---

<div class="post-metadata">

**Author:** ![Viffer](https://forum.vf1000.com/user_avatar/forum.vf1000.com/viffer/32/2469_2.png) [@Viffer](https://forum.vf1000.com/u/Viffer)\
**Post date:** [June 20, 2020, 3:50pm UTC](https://forum.vf1000.com/t/wanting-1000f-petcock/3501/18 "2020-06-20T15:50:17Z")

</div>

Thanks Bif, but it was all Google translate! I only managed CSE grade 4 french 😂 😂
